WIZ510SR-RP is a compact sized serial to Ethernet module using the RP2040 MCU with W5100S Ethernet Chip. WIZ510SR-RP is a protocol converter that transmits data sent by serial equipment as TCP/IP data, and converts the TCP/IP data received through the network back into serial data to the serial equipment.

In addition, WIZ510SR-RP contains serial debug port(J1).

  • Serial to Ethernet Module based on RP2040 MCU (TTL level)
  • Includes W5100S and magnetic rj45 modular jack
  • 10/100Mbps Ethernet & Up to 230kbps serial speed
  • Status pins: PHY link status / TCP connection status
  • Serial signals(RS-232C)
  • WIZ510SR-RP has UART x 1, SWD x 1 ,RS232C x 1, Ethernet x 1
  • Configuration is possible via serial AT commands or via
  • Configuration tool
  • Support WIZ VSP (Virtual Serial Port) program
  • Built in 10/100Mbps Ethernet ESD Protection IC
Hardware Specification
  • Dimension (mm): 76mm x 45mm x 15mm
  • Input Voltage: 3.3V
  • Operation Temperature: -20 ~ 85c

WIZ510SR-RP Datasheet

  • You can check the hardware specification of WIZ510SR-RP
  • Last Update: 2022. 06

WIZ510SR-RP Getting Started

  • WIZ510SR-RP Getting started
  • Last Update: 2022. 06
Software Download

WIZ5xxSR-RP Firmware Update guide

  • Last Update: 2022.06
  • Firmware update guide for WIZ500SR-RP / WIZ505SR-RP / WIZ510SR-RP
  • WIZnet S2E Configuration Tool

WIZVSP Program for Windows

  • Last Update: 2017.04.28
  • WIZnet Virtual Serial Port: It can be used to change the device that is connected to the PC through the existing serial interface to control by the remote Ethernet network.
  • When you agree to the End User License Agreement for WIZVSP on our website form, you will be able to download the program and get a registration key. When registering the product with license agreement, the MAC address of the product in use and the email address of the contact person are required.