W6100-EVB
Key Features
  • 32bit ARM Cortex-M3 based evaluation board for W5100S chip
  • Hardware pin-compatible with Arduino Uno Rev.3
  • Supported 2 Push button switch (SW), 1 x RGB LED
  • Supported 1-Port Ethernet Connector / USB-micro Type B connector
  • Supported ISP & SWD Interface
  • Provides various application code – Loopback, DHCP, DNS.

Hardware Specification
  • MCU: STM32F103VCT6 Cortex-M3 (Running at up to maximum 72MHz, 256 or 512KB Flash, 64KB SRAM)
  • Ethernet: W5100S (WIZnet Hardwired TCP/IP)
  • Power: 5V DC Power
  • Expansion I/O: 80 GPIOs (Include analog Peripheral using 12bit ADC)
  • RJ-45: 1-channel 10/100 Base-TX RJ-45 with Transformer (57-00013QL11-1 / UDE)
  • USB: USB Micro-B Type (On-board USB-to-UART IC, USB BUS Power / CP2104) – Use to debug
  • On-board User I/F: 2xPush button switch, 1xRGB LED
  • Dimension (mm): 90 (L) x 80 (W) x 15(H)
Materials in WIZwiki

W6100-EVB Firmware and Example

  • Firmware components
  • Drivers
  • Application Projects

Getting Started

  • User guide for W6100-EVB

Make New W6100 EVB Projects

  • How to make project for W6100-EVB