WizFi210
개요

WizFi210은 기존의 시리얼 어플리케이션을 WiFi가 가능한 솔루션으로 쉽고 빠르게 바꿔줄 수 있는 Serial-To-WiFi 제품이다. WizFi210은 시리얼 인터페이스를 통해 모듈의 모든 기능을 설정할 수 있는 AT Command Set을 제공한다. 그러므로, 시리얼 장비뿐 만 아니라, 8/16/32비트 마이크로 컨트롤러에서도 UART를 통해 쉽게 WiFi 설정을 할 수 있다. WizFi210을 이용하면, 무선 모듈 디자인이나 테스트, 인증 등의 과정을 획기적으로 감소시킬 수 있다. 따라서, 무선 네트워크 경험이 전혀 없거나 제한적인 고객들에게도 최선의 솔루션이 될 수 있다. WizFi210은 802.11b를 지원하고, WPS, WPA Enterprise(EAP-TLS)등의 최신 무선 규격을 지원한다.

제품 특징
  • Single band 2.4GHz IEEE802.11b Wi-Fi module
  • Host Interface : UART & SPI
  • Quick booting time : under 20msec
  • Ultra low power through dynamic power management (34µA at the standby mode)
  • Security protocols : WEP, WPA/WPA2-PSK, Enterprise (EAP-FAST, EAP-TLS, EAP-TTLS, PEAP)
  • Operation temperature : -40 ~ 85℃
  • CE, FCC, KCC, TELEC certified
  • Dimension : 32 x 23.5 x 2.9(mm)
  • Provides chip antenna mounted version
Evaluation Board
  • WizFi210-EVB
ShopDtl_1133_20150123170100
Guide Docs

Technical Support

Buy Now
Hardware Block Diagram
210_block
Ordering Information
wizfi_250_order
Download
Documents

WizFi210/ WizFi220 Datasheet 1.2.0

  • Last Update: 2013.05.29

WizFi210/ WizFi220 Programmer’s Guide V1.3.1

  • Last Update: 2013.06.24

WizFi210/ WizFi220  Quick Start Guide V1.0.0

  • Last Update: 2013.05.29

WizFi210/ WizFi220  Application Note

  • (AP310)WIZSmartScript-Description_EN_V1.01
  • (AP320)WIZSmartScript-Firmware Upgrade_EN_V1.01
  • (AP330)WizFi Range Test_EN_V1.0
  • (AP340)Antenna Type Description
  • (AP350)HTTP Data Transfer
  • (AP370)Using New Firmware version in Old EVB Type
  • (AP400)Multi Connections
  • (AP450)How to Set Low Power Mode
  • (AP460)Power State Management for WizFi210
Firmware

WizFi210/ WizFi220 Firmware

  • V1.1.1.0 (2013.04.23) : The lastest Version
  • V1.1.0.5 (2012.03.20)
  • V1.1.0.0 (2011.10.18)

SPI Interface If you need the material, please contact to our local office. – WIZnet US : sales_team@wiznettechnology.com – WIZnet HK : sales@wiznet.hk – WIZnet EU : sales@wiznet.eu – WIZnet HQ : sales@wiznet.io Enterprise Firmware This firmware support EAP feature(AT+WEAPCONF command), HTTP feature(AT+HTTPCONF command) and SSL feature(AT+SSLOPEN command).The version of this firmware is 1.2.0.2(E).(‘E’ means the enterprise version). This firmware can be uploaded from the hardware version 1.0.1?If you need the material, please contact to our local office. – WIZnet US : sales_team@wiznettechnology.com – WIZnet HK : sales@wiznet.hk – WIZnet EU : sales@wiznet.eu – WIZnet HQ : sales@wiznet.io